#8063 quad platform docs how to
#8063 quad platform docs full

Unzip the L4.9.88_2.0.0-ga_ file to a selected location.

The compressed file is found in the pre-built Linux BSP image download bundle.

Perform the following steps to flash the board images: The MFGTool is used to download images to different devices on i.MX board. The Manufacturing Tool, named MFGTool, is NXP tool of choice to load images on i.MX boards from a Windows OS host computer. For details, refer to the NXP Yocto Users Guide.īurn NXP Linux BSP image using Manufacturing Tool

#8063 quad platform docs how to

The Yocto Project is the framework of choice with NXP professional support to build custom images that are used for booting a Linux kernel, although other methods can be used.ĭetails on how to set up the Yocto Project go beyond this getting started guide. The Yocto ProjectĪs an option, NXP provides a framework to build custom images. To build an NXP Linux BSP image, you can obtain the source code from the i.MX CodeAurora repository.ĭetailed instructions on how to build an image are available in the Linux User Guide. Build your own Linux BSP image (optional) For example, add or remove system components. With the source code and documentation, the users can customize the Linux image built for the device.

#8063 quad platform docs full

To load individual components separately when the full SD card image is not used, refer to 4.3.4-3.4.6 in i.MX Linux User Guide. To setup the partition manually, read 4.3.3 in i.MX Linux User Guide. $ sudo dd if=.sdcard of=/dev/sdX bs=1M & sync Once the BSP package is downloaded from the Linux download page, ensure that a pre-built SD card image built specifically for the i.MX8MQuad EVK board is in the compressed file. Burn an SD card disk image from a Linux host computer

sdcard image is loaded and the individual parts are overwritten with the specific components. When more flexibility is desired, an SD card can be loaded with individual components (boot loader, kernel, dtb file, and rootfs file) one-by-one or the. sdcard images contain these four elements in a single file. A root file system ( rootfs) for the particular Linux image.To bring up the board and run Linux, four elements are needed on the boot image: Without modifying the system, users can evaluate hardware interfaces, test SoC features, and run userspace applications. The pre-built NXP Linux binary demo image provides a typical system and basic set of features for using and evaluating the processor. The latest pre-built images for the i.MX8MQuad EVK is available on the Linux download page. This is the simplest way to load all necessary components required to boot the i.MX8MQuad EVK board. sdcard file is a disk image that is flashed directly into any SD card. Download an NXP Linux BSP pre-built imageĪ.